
What a new roof costs in Lubbock in 2026
A roofing estimate is a stack of small numbers that add up to a big one. Knowing what each line is for makes it much easier to compare two bids honestly.
The unit: a square
Roofers price by the square, 100 square feet of roof surface. A typical one-story Lubbock home with a 1,800 to 2,400 square-foot footprint has roughly 24 to 32 squares of roof once the overhangs and pitch are counted; a two-story home with a steep hip roof can run 35 to 50. Your estimate should state the number of squares it is based on, and two bids for the same house should be within a square or two of each other.
Typical 2026 totals
| Roof | 24–32 squares | Notes |
|---|---|---|
| Architectural asphalt shingle | $10,500 – $17,500 | Tear-off, underlayment, vents, flashing, cleanup |
| Class 4 impact-resistant shingle | $12,000 – $21,000 | 10% to 25% above standard; ask your insurer about credits |
| Standing-seam metal | $28,000 – $48,000 | Roughly $11 to $16 per square foot of roof |
| Exposed-fastener metal over decking | $15,000 – $28,000 | Lower cost, screws need upkeep |
The lines that move the total
- Pitch and height. Steep roofs (8/12 and up) and two-story homes need more safety setup and go slower, often adding 10 to 25 percent.
- Layers. Every extra layer of old shingles costs roughly $12 to $25 per square to tear off and haul away.
- Decking. Soft or rotted sheets are replaced at about $75 to $120 each. A fair estimate states the per-sheet price instead of a vague allowance.
- Complexity. Valleys, dormers, skylights, chimneys and walls each add flashing work.
- Ventilation. Adding ridge vent and soffit intake often costs $300 to $900 on a replacement and protects the new shingles.
- Permit. Inside the City of Lubbock, the contractor pulls the permit, commonly $250 to $1,000 depending on the job.
- Gutters. Not part of the roof, but often replaced at the same time after hail at $9 to $16 per foot.
Comparing two bids
Line them up by squares, shingle line, underlayment type, whether drip edge and flashing are new or reused, the per-sheet decking price, the ventilation plan, the permit, and the workmanship warranty in writing. A bid that is much lower than the others is usually missing one of those lines, not a better deal.
Quick answers
Why do estimates vary so much?
Different square counts, shingle lines and assumptions about decking, flashing and ventilation. Compare line by line.
Does insurance change the price?
The price for the work is the same; insurance changes who pays which part. Your deductible is always yours to pay.
Is metal worth the extra cost?
It can be if you plan to stay a long time. It lasts longer than shingles but can dent in big hail. See the metal roof cost guide.
When is the best time to replace a roof in Lubbock?
Fall and early winter are calmer than the spring storm season, and scheduling is easier then. After a big hailstorm, everyone needs a roof at once.
Keep reading: Roof replacement · Metal roof cost · Impact-resistant shingles · Permits