
Metal roofs for houses, shops and barns on the South Plains
Metal handles wind, sheds the occasional heavy rain fast, and reflects a lot of the summer sun. It can still dent in big hail. Here is how the two main systems differ and where each one fits.
There are two kinds of metal roof on the South Plains. Standing seam uses long panels joined by raised seams, with the fasteners hidden under the seam on clips that let the metal expand and contract through Lubbock's wide daily temperature swings. It is the system for homes and for anyone who wants a roof that will not need its screws re-tightened. Exposed-fastener panels, the ribbed R-panel and corrugated profiles on so many shops, barns and equipment sheds in the county, screw straight through the panel into purlins or decking. They cost less and go on fast, and the rubber washers on those screws are the maintenance item to watch as they age in the sun.
Metal's strengths here are real. Properly fastened panels and trim stand up well to the steady wind; the roof sheds water quickly in the heavy downpours that bring most of the year's 18 inches of rain; and light-colored or coated panels reflect sun that would otherwise heat the attic. Its weakness is hail: large stones can dent metal, especially thinner panels, and some insurance policies treat dents differently from functional damage. Thicker 24-gauge panels and textured or striated finishes hide and resist dents better, and the estimate prices gauge options side by side.
A metal job starts like any replacement: the old roof comes off, the deck is checked, and a high-temperature synthetic underlayment goes down. Then come the panels, cut to length, with matching trim at eaves, rakes, valleys, ridge and walls, closures under the ridge cap to keep dust and birds out, and pipe flashings made for metal. On a shop or barn we can often go over open purlins. Inside the City of Lubbock, the contractor pulls the permit for a residential reroof.
What the job covers
Standing seam for homes
Concealed clips and fasteners, panels free to move with temperature swings, crisp lines on the house.
R-panel for shops and barns
Exposed-fastener ribbed panels with washered screws for outbuildings, carports and equipment sheds.
Gauge and finish options
26- and 24-gauge panels and textured finishes priced side by side for hail resistance.
High-temperature underlayment
Synthetic underlayment rated for the heat under metal on a July afternoon.
Trim and closures
Eave, rake, valley, ridge and wall trim, with foam closures against blowing dust.
Metal pipe flashings
Penetrations sealed with flashings made for metal panels, not shingle boots.
Metal roofing prices in Lubbock
| Work | 2026 range | What moves it |
|---|---|---|
| Standing-seam metal, residential | $11 – $16 per sq ft | Gauge, panel width, roof complexity |
| Exposed-fastener R-panel over decking | $6 – $9.50 per sq ft | Gauge, tear-off, trim |
| R-panel on a shop or barn over purlins | $4.50 – $7.50 per sq ft | Building size, height, gauge |
| Re-screw an aging exposed-fastener roof | $1 – $2 per sq ft | Screw count, washer condition |
| Upgrade 26 to 24 gauge | +8% – 15% | Panel profile |
Budgeting ranges for Lubbock County in 2026, not quotes. Your price comes on a written estimate after a roofer has been on the roof, and nothing is scheduled until you approve it.
On the job


Metal roofing: common questions
Does hail dent a metal roof?
Large hail can, especially on thinner panels. Dents are often cosmetic and the roof keeps shedding water, but check how your policy treats cosmetic damage. Thicker gauges and textured finishes help.
Is a metal roof louder in a storm?
Over solid decking and underlayment on a house, rain and hail are not much louder than on shingles. Over open purlins on a barn, yes, they are loud.
Can metal go over my old shingles?
We recommend a tear-off on homes so the deck can be checked and the panels lie flat. Over-roofs on shops and barns over purlins are common.
How long does a metal roof last?
A well-installed standing-seam roof can outlast several shingle roofs. Exposed-fastener roofs last a long time too, but the screws need checking and replacing as the washers age.
Do you install metal on carports and patios?
Yes. Patio covers, carports and porch roofs are common small metal jobs and are priced by the panel and trim.
Related: Metal roof cost · Roof coating · Commercial roofing